Auto & Accessory Experts .::. Amps and Speakers

Rockford Fosgate ~ PUNCH ~ P1

10" $99.99 12" $109.99

P1S410 (available in 8-Ohm)

10" Punch P1 4-Ohm SVC Subwoofer

The P1 10" subwoofers are a great choice for those looking to add some PUNCH to their system without breaking the bank. They are designed for small enclosures, so they won't monopolize your trunk space either.

Features:

Custom 10-AWG nickel plated push terminals
High density poly-foam surround
High-temp voice coil with spun-laced Nomex® re-inforcement collar
Linear spider with embedded 16 AWG tinsel leads
Parabolic injection molded ABS/Acrylic dustcap
Protective PVC textured magnet cover
Reversable ABS trim ring
Thermoformed polypropylene cone

Rockford Fosgate ~ PUNCH ~ P2

10" $139.99 12" $159.99

Rockford Fosgate has always been known as “The PUNCH” and the P2 10" subwoofers certainly continue with the tradition. With their 4-Ohm Dual Voice Coils, they are an easy addition to almost any vehicle, the P2 subwoofers perform best in standard sealed and vented enclosures and their double-stacked magnets deliver REAL Bass!

Features:

Custom 10-AWG nickel plated push terminals
Extended pole piece and bumped backplate
High density poly-foam surround
High-temp voice coil with spun-laced Nomex® re-inforcement collar
Linear spider with embedded 16 AWG tinsel leads
Parabolic injection molded ABS/Acrylic dustcap
Protective PVC textured magnet cover
Reversable ABS trim ring
Sturdy 16 gauge compound-bend frame
Thermoformed polypropylene cone
Vented spider cavity

Rockford Fosgate ~ PRIME® Amplifiers

$129.99 - $399.99

Rockford Fosgate amplification at an unbelievable value. The R500-1 mono amplifier pumps out 500 watts into a 2-ohm load, perfect for a pair of R1S410 10" or R1S412 12" woofers. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier.

Features:

12dB/octave crossover
4 Gauge power/ground connections with built-in ATC fusing
MOSFET power supply
RCA pass-thru

Rockford Fosgate ~ Punch® Amplifiers

$199.99 - $599.99

With its super efficient Class-BD circuit topology, the P500-1bd will drop some serious BASS! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.

Features:

12dB/octave crossover
4 Gauge power/ground terminals
Audiophile grade speaker connections
Infrasonic filter
MOSFET output stage
MOSFET power supply
RCA pass-thru
Top Mounted LED Indicators

Rockford Fosgate ~ POWER Speakers

5.25, 5x7, 6.5, 6x9, 6.5 components

$119.99 - $399.99

Features:

3 levels of tweeter attenuation
5% tolerance high quality poly-capacitors and air-core inductors
Butyl rubber surround
External audiophile grade component crossover
FlexFit basket design
OEM adapter plate included
On-axis/off-axis tweeter configuration
Recessed tweeter mount uses standard 1-3/4" hole saw
Treated fabric dome neo-tweeter with integral suspension

ALPINE R-type subwoofer

10" $199.00 12" $229.00

Power Handling
Power Handling Capacity (RMS): 500W
Power Handling Capacity (Peak): 1500W

ALPINE S-type subwoofer

10" $99.00 12" $109.00

Power Handling
Power Handling Capacity (RMS): 300W
Power Handling Capacity (Peak): 900W

Alpine MRP-M2000 Mono subwoofer amplifier — 2,000 watts RMS x 1 at 2 ohms

ALPINE Amplifier MRP-M2000

Features:

Mono subwoofer car amplifier
1,500 watts RMS x 1 at 4 ohms (2,000 watts RMS x 1 at 2 ohms)
Variable low-pass filter (50-200 Hz, 24 dB/octave)
Variable bass boost (0-12 dB, 30-80 Hz)
Selectable subsonic filter (off, 15, 30 Hz; 24 dB/octave)
Next-GenerationV-PowerClass D amp with MOSFET power supply
CEA-2006 compliant
Speaker- and preamp-level inputs
Gold-plated screw terminals
0/1-gauge power and ground leads recommended — wiring and hardware not included with amplifier
20-1/4"W x 2-3/8"H x 9-9/16"D
Warranty: 1 year

$699.00